Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Fast, Reliable Fire Damage Restoration Across Upland
A kitchen flare-up on Foothill Boulevard or an electrical fire in a Euclid Avenue bungalow can leave your Upland home with damage that spreads far past the burn mark. Fire damage restoration in Upland typically costs between $3,200 and $12,500 depending on the scope, and our crews can be on-site within 60 to 90 minutes of your call. We’re dispatched from our Inland Empire office and know the difference between a 1906 Craftsman near Historic Downtown and a 1980s tract home off the 210 corridor, so we scope the job correctly the first time. Call (361) 317-7269 any hour, day or night, and a live person picks up.
Why Keegan Water Damage Restoration Is Upland’s Preferred Fire Damage Restoration Company
We’ve worked Upland long enough to know that a fire on a north-facing slope below the San Gabriel Mountains faces different drying challenges than one in the flat grid near the Colonies. Our technicians have restored homes from San Antonio Heights down through the older neighborhoods along Mountain Avenue, and we bring that local knowledge to every scope of loss we write.
Response time matters after fire damage. Smoke residues start etching glass and corroding metal within hours, and in Upland’s warm, dry climate, that timeline compresses. Our crews run to The Garrison Standard: background-checked, uniformed, and equipped with Dri-Eaz and Phoenix extraction and air-scrubbing systems. The price goes in writing before any work starts, and every repair carries our 365-Day Done Right Promise.
We also handle Water Damage Restoration in Upland when suppression soaks drywall and subfloors, and Mold Remediation in Upland when standing water sits hidden behind charred studs. One call handles the full chain of damage.
Fire Damage Restoration Company in Upland
Fire Damage Restoration Company work in Upland means more than hauling out burned debris. It means documenting every damaged item for your adjuster, stabilizing the structure against further collapse, and rebuilding to California’s current building codes, which are stricter than what many older Upland homes were originally built to. A typical fire damage restoration job in Upland runs $3,200 to $12,500, with smaller kitchen or single-room fires landing in the $3,200 – $6,800 range and whole-house structural rebuilds climbing toward $12,500 or above.
Structural Stabilization and Board-Up
After the fire department vents the roof or kicks in a door, your home is open to weather, animals, and theft. We secure the envelope with plywood and temporary roofing, then assess whether load-bearing walls or ceiling joists need shoring. Every board-up is photographed for your insurance file before we leave the site.
Contents Pack-Out and Inventory
Smoke permeates everything porous, textiles, paper, unfinished wood. We inventory, photograph, and transport salvageable contents to our facility for ozone treatment and ultrasonic cleaning. Non-salvageable items are documented with replacement cost research to support your personal property claim.
Smoke Damage Restoration in Upland
Smoke Damage Restoration in Upland addresses the damage you cannot always see. Superheated smoke pushes through wall cavities, into HVAC ducts, and behind electrical outlets, leaving acidic residues that continue degrading surfaces for days. In Upland’s dry Santa Ana wind conditions, these residues settle deeper into porous materials faster than in more humid climates. A typical smoke damage restoration in Upland runs $2,400 to $7,800 depending on square footage and how far the smoke traveled through the structure.
Thermal Fogging and Odor Neutralization
We deploy thermal foggers that recreate the heat and pressure of the original fire, opening smoke-damaged pores in wood and drywall so the neutralizing agent penetrates where surface cleaners cannot reach. For severe cases, we seal and repaint with odor-blocking primers after verification with an XPOWER hydroxyl generator.
HVAC and Duct Decontamination
Smoke drawn into your ductwork recirculates every time the system runs. We inspect with borescope cameras, then clean or replace ducting as the scope of loss dictates. In Upland, where residents run cooling systems heavily through fire season, this step prevents recontamination of cleaned spaces.
Trusted Brands We Service in Upland
Our equipment roster draws from the brands used in IICRC-standard restoration work nationwide: Dri-Eaz dehumidifiers and air movers, Phoenix desiccant systems for large-loss drying, XPOWER air scrubbers and hydroxyl generators, and B-Air negative-air machines for containment. We stock common filtration media and replacement parts locally, so when an Upland job needs a second HEPA unit or a desiccant rotor swap at 10 p.m. on a Sunday, we’re not waiting on a warehouse in another state. Every machine is logged, maintained, and calibrated to manufacturer spec because The Garrison Standard does not allow “good enough” on equipment that determines whether your home is truly restored or just surface-clean.
Common Fire Damage Restoration Problems We See in Upland Homes
- Kitchen grease fires in older homes near Historic Downtown. Many of these properties still run original 1960s or 1970s range hoods with marginal ventilation. A grease flare-up sends oily smoke residues that bond to plaster and lathe, requiring aggressive alkaline cleaning and often sealant before repaint.
- Electrical panel fires in hillside homes with added square footage. San Antonio Heights and north Upland properties often have original 100-amp service stressed by additions, ADUs, or pool equipment. We see melted bus bars that damage the wall cavity behind the panel, requiring both electrical rebuild and fire restoration.
- Wildfire ember intrusion during Santa Ana events. Even homes that never ignite can suffer smoke and ash infiltration through attic vents and window gaps. These jobs look minor but require full structure cleaning because the particulate is caustic and pervasive.
- Suppression water damage after sprinkler or hose activation. Upland’s hard water leaves mineral deposits on top of soot, creating a bonded film that standard cleaning will not touch. We sequence the job with specialized chelating agents before standard restoration begins.
Pricing for Fire Damage Restoration in Upland, CA
We put the price in writing before any work starts, every time, no exceptions. Here is what fire damage restoration typically costs in the Upland market:
| Service | Typical Range in Upland |
|---|---|
| Emergency board-up and stabilization | $850 – $2,400 |
| Smoke and soot cleanup (per affected room) | $1,200 – $3,800 |
| Structural fire repair (drywall, framing, flooring) | $3,200 – $9,500 |
| Full smoke odor removal and HVAC cleaning | $2,400 – $5,600 |
| Contents pack-out, cleaning, and storage | $1,800 – $4,200 |
| Complete fire damage restoration (whole house) | $8,500 – $12,500+ |
Factors that move the price: how far smoke traveled through the structure, whether water suppression added secondary damage, the age and type of finishes (older plaster costs more to restore than modern drywall), and whether asbestos or lead testing is required for pre-1978 Upland homes. Every estimate is free, itemized, and delivered in writing before we start. Call (361) 317-7269 to schedule.
We Also Serve Cities Near Upland
Our crews run restoration work throughout the western Inland Empire. If you need Fire Damage Restoration in Upland or live in Rancho Cucamonga, Claremont, Montclair, or Ontario, the same live-answer dispatch and written-price standard applies. We know the building stock and insurance adjusters in each city, and we document every job to support your claim regardless of municipality.
Serving Upland, CA – Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Fire Damage Restoration in Upland
Our typical response time to Upland is 60 to 90 minutes from your call, and a live person answers the phone 24 hours a day. Call (361) 317-7269 and we’ll give you a real ETA based on current traffic and crew location.
Yes, we restore fire damage from San Antonio Heights and north Upland down through the Colonies, Historic Downtown, and the neighborhoods along Foothill Boulevard and Euclid Avenue. Hillside access and older street grids do not change our response standard.
Yes, emergency board-up and stabilization are available every hour of every day, including holidays. We secure the structure, photograph everything for your adjuster, and deliver a written scope and price before any restoration work begins.
Upland pricing runs comparable to Rancho Cucamonga and Ontario, though older homes near Historic Downtown or in the hills may need additional asbestos or lead testing that adds $400 to $800. We itemize every line so you see exactly what drives the cost.
Every repair is backed by our 365-Day Done Right Promise, a written, one-year guarantee. If any work fails within that year, we return and make it right at no charge, including a free second visit. That’s The Garrison Standard, and it applies to every Upland job we complete.
Written by Shane Pruitt, Owner at Keegan Water Damage Restoration, serving Upland and the Inland Empire since 2005.






Before
After
Before
After
Before
After